FQCNO2.8 axial pneumatic draw local fans | fan manufacturers shelf pneumatic, pneumatic withdrawable local fans, pneumatic axial draw local fans, FQCNO2.8 pneumatic draw-axial pneumatic local fans FQCNO2.8 withdrawable axial local fan installation instructions: 1, the fan should be carefully checked before installation if there is damage to the deformation, deformation if damaged, to be repaired properly before installation. 2, the installation should pay attention to check out some loose coupling, blades and duct clearance should be uniform, not touching. 3, the weight of the pipe coupling outlet fan duct should not bear the installation should be additional support. 4, must be installed in the fan outlet side set wind device, and install protective nets. askhfksd No. Airflow m3 / s Pressure Pa gas pressure MPa Air consumption m3 / s speed r / min Diameter mm Weight Kg Length mm FQC № 2.8 0.85 500 0.45 0.027 3000 280 20 235 FQC № * 1 600 0.45 0.033 3000 315 25 280 FQC № 4.0 2 750 0.45 0.090 3000 400 41 450 FQC № 5.0 3 800 0.45 0.120 3000 500 50 550 FQCNO2.8 axial pneumatic draw local fans, lower noise, noise (sound level than A) reduce 3.6dB (A) . Withdrawable axial fan with low pressure, high wind, wind resistance, low power consumption, low noise, wide application and other characteristics.